filename: tfs 70bl.doc version 1.1 03.11.2010 vectron international filter specification tfs 70bl 1/5 measurement condition ambient temperature: 25 c input pow er level: 0 dbm terminating impedance: * input: 400 ? || -15.6 pf output: 130 ? || -23.8 pf ch aracteristics remark: the reference lev e l for the relativ e attenuation a rel of the tfs 70bl is the minimum of the pass band attenuation. this v a lue is defined as the insertion loss a e . the nominal frequency f n is fix ed at 70,0 mhz w i thout any toleranc e. the v a lues of relativ e attenuation a rel are guaranteed for the w hole operating temperature range. the frequency shi ft of the filter in the operating tem perature range is included in the production tolerance scheme. d a t a ty p. v a lue tolerance / limit insertion loss a e 8 , 2 d b m a x . 1 0 d b (reference level) nominal frequency f n 7 0 , 0 m h z passband p b 6 , 1 m h z f n 2,5 mhz pass band ripple (p-p) 0 , 3 d b m a x . 1 , 0 d b relativ e attenuation a rel f n ? f n 2 , 5 mhz 0 , 3 d b m a x . 1 d b f n 5 , 0 m h z ? f n 2 0 , 0 mhz 3 5 d b m i n . 3 0 d b operating temperature range otr - 10 c ... + 75c storage temperature range - 40 c ... + 85c temperature coefficient of frequency t c f ** -88 ppm/k - *) the terminating impedances depend on paras itics and q-v a lues of matching element s and the board used, and are to be understo od as reference v a lues only . should there be additional questi ons do not hesitate to ask for an applicat ion note or contact our design team. **) ? f c (hz) = tc f (ppm/k) x (t - t a ) x f cat (mhz) ge ne ra te d: ch ecked / a p p r o v ed : vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 70bl.doc version 1.1 03.11.2010 vectron international filter specification tfs 70bl 2/5 f ilter ch aracteristic 50 54 58 62 66 70 74 78 82 86 90 -7 0 -6 3 -5 6 -4 9 -4 2 -3 5 -2 8 -2 1 -1 4 -7 0 f r e que nc y i n m h z m a g n itu d e in d b in s e r t io n lo s s : - 7 .9 0 d b 67 68 69 70 71 72 73 -5 -4 .5 -4 -3 .5 -3 -2 .5 -2 -1 .5 -1 -0 .5 0 f r e que ncy i n m h z m a g n itu d e in d b cons truc tion a nd pin c onne c t ion (all dimensions in mm) 13 ,6 ma x . 6,8 m a x . 1 2, 0 m a x . 8 9 10 1,5 2, 5 4 0 ,1 5 2,5 4 0 ,15 0,8 0,1 1 2 3 4 5 6 7 11 12 d a te c o d e date code: y ear + w eek a 2010 b 2011 c 2012 ... 1 ground 2 ground 3 ground 4 ground 5 output 6 output rf return 7 ground 8 ground 9 ground 10 ground 11 input 12 input rf return tfs 70bl a45 50 oh m t est circu i t c1 l1 sa w l 2 c2 12 1, 2, 3, 4, 7, 8, 9, 10 6 5 11 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 70bl.doc version 1.1 03.11.2010 vectron international filter specification tfs 70bl 3/5 stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 1700 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff d i r e c t i o n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 24,00 +0,30/-0,10 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,10 f : 11,50 0,10 g(min) : 0,60 p2 : 2,00 0,1 p1 : 12,00 0,1 d1(min) : 1,50 a o : 7,10 0,10 bo : 13,90 0,10 ct : 21,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 24,4 +2/-0 w 2 (max ) : 30,4 n(min) : 60 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm. vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 70bl.doc version 1.1 03.11.2010 vectron international filter specification tfs 70bl 4/5 a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 70bl.doc version 1.1 03.11.2010 vectron international filter specification tfs 70bl 5/5 history version reason of changes name date 1.0 g eneration of development specification chilla 04.01.2010 1.2 - created filter specification chilla 03.11.2010 - added terminating impedances - added ty pical values - added temperature coefficient of frequency - added filter characteristic - added test circuit vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
|